AT-30 Corrosion Inhibitor

Metal Mates

Metal Mates AT-30 is an in-process / short-term rust preventive that is typically applied at 3% dilution. This water-based product dries to a light, non-tacky film and provides excellent corrosion protection for steel parts. AT-30 can be used by itself or

FEATURES

  • Light protective film
  • Easy to clean

APPLICATIONS

  • Spray, brush, roll coat or drip application on cold and hot rolled steel.

Packaging Details

Part No. US Container Type Units/Case Color
MM4203 55 gal drum 1 clear, light amber
MM4206 330 gal tote 1 clear, light amber

Search for discontinued products in the SDS Finder

Properties

Handling Use appropriate safety equipment. Use with adequate ventilation. Avoid
contact with eyes, skin and clothing. Keep away from extreme heat. Keep
container closed when not in use.
Storage Store away from extreme heat, flame, or ignition sources. Pressure build up
may occur due to heat exposure or temperature change. Release pressure by
slowly opening container.
Physical State liquid
Odor amine odor
pH at 10% 8.0-9.0
Specific Gravity 1.04
Boiling Point 212F (100C)
Vapor Pressure <1 mmHg
Vapor Density >1
Disposal Information Absorb on suitable material and follow procedures listed below. Dispose of in a manner that is recommended by local, state, provincial and
federal laws and regulations.
Prop 65 Warning No
Refractometer Readings 3-8 RI
Dilution Ratios 3:1 to 10:1
Directions Dilute Metal Mates AT-30 with water to suit the specific application.
Normal Protection: 3%
NOTE: These dilution ratios should only be used as general guidelines and are not exact specifications. Please contact your Metal Mates Regional Sales Manager for
Handling Use appropriate safety equipment. Use with adequate ventilation. Avoid
contact with eyes, skin and clothing. Keep away from extreme heat. Keep
container closed when not in use.
Storage Store away from extreme heat, flame, or ignition sources. Pressure build up
may occur due to heat exposure or temperature change. Release pressure by
slowly opening container.
Physical State liquid
Odor amine odor
pH at 10% 8.0-9.0
Specific Gravity 1.04
Boiling Point 212F (100C)
Vapor Pressure <1 mmHg
Vapor Density >1
Disposal Information Absorb on suitable material and follow procedures listed below. Dispose of in a manner that is recommended by local, state, provincial and
federal laws and regulations.
Prop 65 Warning No
Refractometer Readings 3-8 RI
Dilution Ratios 3:1 to 10:1
Directions Dilute Metal Mates AT-30 with water to suit the specific application.
Normal Protection: 3%
NOTE: These dilution ratios should only be used as general guidelines and are not exact specifications. Please contact your Metal Mates Regional Sales Manager for

This website uses cookies to ensure you get the best experience on our website. More info.

accept