BRITE-MARK® H2O Water-Based Permanent Paint Marker/Valve Action


  • BRITE-MARK® H20 is a general purpose water based paint marker that writes on almost any surface.
  • Makes permanent bright marks on metal, rubber, plastic, glass, concrete, leather, stone, wood, vinyl and more.
  • Water-based paint withstands normal industrial environments
  • "Does not contain any HAP’s (Hazardous Air Pollutants) which makes them a smart alternative to using
  • spray paint and stencil for big, bold marks. "
  • Does not contain any reportable amounts of Xylene.
  • Markers can be used to permanently identify inventory, assemblies, tools, finished products or work in progress while resisting most work related abuses or compounds.
  • Valve action mechanism prevents paint in barrel from drying when the cap is left off.
  • Bullet tips are replaceable to assure complete use of paint in each marker.
  • Large paint capacity.
  • BRITE-MARK® 40 features a threaded barrel that can be screwed into a jig or fixture for a continuous marking process.
  • BRITE-MARK® Medium and 40 have a heavy duty aluminum body with large paint capacity.
  • BRITE-MARK® Fine is a light weight marker that writes fine, distinctive marks.


  • Safe on most surfaces.
  • Removable with DYKEM® Remover & Cleaner.
  • Surface tests should be run to determine compatibility prior to use.


  • Slightly combustible liquid and vapor. Keep away from heat, sparks and flame. Use only with adequate ventilation. Avoid contact with skin and eyes.
  • Refer to SDS (Safety Data Sheet) for complete information on health and safety. Visit our website at www.dykem.com to obtain an MSDS.


Appearance / Physical State Varies
Odor Mild
VOC Content 12% - 19% by weight
Flash Point >200°F
Dry Time 45-60 seconds
*Note: Drying time may vary depending on film

This website uses cookies to ensure you get the best experience on our website. More info.