Strong Steel Sticks Renewal Composite

A hand-kneadable, non-rusting adhesive epoxy putty to quickly repair leaks, cracks, or holes in metal, concrete, wood, fiberglass, and ceramics.


  • Hand-kneadable, ready-to-use stick for fast emergency repairs
  • Hardens like steel in 60 minutes
  • Can be machined, drilled, tapped and painted in 60 minutes
  • Plugs and seals leaks; Non-rusting
  • Patches holes and cracks in pipes, drums, and tanks
  • Can be used for underwater repairs
  • Chemical Resistance: Alcohols, Aqueous salt solutions, Bases, Dilute Acids, Esters, Halocarbond, Hydrocarbons, Ketones


  • Ceramics
  • Custom Formed Gaskets
  • Ductwork
  • Electrical Equipment
  • Machinery
  • Plumbing
  • Underwater
  • Vehicles

Packaging Details

Part No. US Part No. Canada Net Contents Container Type Units/Case Approximate Case Weight Shelf Life
60159 C60159 4 wt oz / 114 g tube 36 12 lbs 10 years

Search for discontinued products in the SDS Finder


Appearance / Physical State Solid.
Color Dark gray.
Odor Not available.
Flash Point Closed cup: not applicable.
Density 18.86 lb/gal
Compression Strength 8,000 psi (55 MPa) (ASTM D695)
Dielectric Strength 300 volts/mil
Electrical Resistance 30,000 megohms-cm
Full Cure Time 24 hours @ 75°F (24°C)
Hardening Time 60 minutes @ 75°F (24°C)
Hardness 80 D (SHORE, ASTM D1706) @ full cure
Lap Shear Tensile Strength on Steel 900 lbs (6.2 MPa) on steel (1" x 1" x 1/16")
Shrinkage <1%
Temperature Range Continuous: -40 to 250°F (-40°F to 121°C)
Intermittent: -40 to 300°F (-40°F to 149°C)
Working Time 4 minutes @ 75°F(24°C)


This website uses cookies to ensure you get the best experience on our website. More info.