

DiamondKote DKW-4070 is a water-based, semi-permanent mold release agent designed for use in the molding of various peroxide-cured elastomers such as Silicone (polysiloxanes), EPDM, and FKM. It is especially effective in the molding of elastomeric seals and gaskets and promotes good rubber flow and helps to keep molds clean. DiamondKote DKW-4070 exhibits higher slip than some of our other release agents and is therefore useful for parts with more difficult geometry or undercut/low draft areas. DiamondKote DKW-4070 is sold as a ready to use material and does not need to be diluted prior to use.
Diamondkote Mold Release agents by ITW Pro Brands are designed to provide the molding industry incredible value, and are used worldwide for some of the most demanding molding applications. Our releases promote clean tooling, reduce re-application, and lower scrap rates in molding operations - all allowing for higher levels of productivity versus competing products. We are known world-wide for ease of application, minimal build-up, higher productivity, and lower scrap rates.
Founded as Franklynn Industries, Inc. in 1991 offering DiamondKote, Aqualift, and later added Crystal brands. Now part of the ITW Pro Brands team.
|
Part No. US | Net Contents | Container Type | Units/Case |
---|---|---|---|
DKW-4070-06 | 303 gal | tote | 1 |
DKW-4070-03 | 55 gal | drum | 1 |
DKW-4070-02 | 5 gal | pail | 1 |
Search for discontinued products in the SDS Finder
Appearance / Physical State | Liquid. |
Color | Cloudy |
Odor | Sweet |
pH Value | 8.5 |
Melting / Freezing Point | N/A |
Boiling Point / Range | 212°F (100°C) |
Flash Point | None to boiling. |
Vapor Pressure | 17.5 mm Hg @ 20°C |
Vapor Density | < 1 (Air=1) |
Specific Gravity | 1 |