SS-15 is a semi sythetic coolant for broaching, drilling and grinding.
|Part No. US||Container Type||Units/Case||Color|
|MM4353||55 gal drum||1||golden yellow-brown|
Search for discontinued products in the SDS Finder
|Handling||Use appropriate safety equipment. Use with adequate ventilation. Avoid
contact with eyes, skin and clothing. Keep away from extreme heat. Keep
container closed when not in use.
|Storage||Store away from extreme heat, flame, or ignition sources. Pressure build up
may occur due to heat exposure or temperature change. Release pressure by
slowly opening container.
|pH at 10%||9.6|
|Flash Point||>200F (>93C)|
|Boiling Point||212F (100C)|
|Melting Point||212F (100C)|
|Vapor Density||Heavier than air|
|Disposal Information||Absorb on suitable material and follow procedures listed below. Dispose of in a manner that is recommended by local, state, provincial and
federal laws and regulations.
|Prop 65 Warning||No|
|Dilution Ratios||Typical Dilution: 10:1 to 25:1 (10-3%)|
|Directions||Dilute Metal Mates SS15with water to suit the specific application.
NOTE: These dilution ratios should only be used as general guidelines and are not exact specifications. Please contact your Metal Mates Regional Sales Manager for an application specific