BRITE-MARK® Fine Permanent Paint Marker

DYKEM® BRITE-MARK® Fine Permanent Paint Markers scribe bright, permanent marks on all types of surfaces. Their fine marks are ideal for permanently identifying small inventory, assemblies, tools, finished products, or work-in-progress. Filled with up to 67% more paint than competitors’ markers, BRITE-MARK Fine Permanent Paint Markers are equipped with valve action mechanisms to prevent paint in the barrel from drying out, even when the cap is off. Additionally, reversible and replaceable bullet nibs keep your marks sharp through the full life of the marker. This all adds up to 40% less waste.


  • BRITE-MARK® Fine is a thin light-weight marker that writes fine, distinctive marks
  • Fine tip allows for easy labeling of small parts
  • BRITE-MARK® is a general purpose paint marker that writes on almost any surface
  • BRITE-MARK® is available in 4 marker styles – BRITE-MARK® Medium, BRITE-MARK® Roughneck®, BRITE-MARK® Threaded Cap , BRITE-MARK® Fine
  • Makes permanent bright marks on metal, rubber, plastic, glass, concrete, leather, stone, wood, vinyl and more
  • Quick drying, oil based, UV resistant paint withstands harsh indoor and outdoor conditions
  • Does not contain any reportable amounts of Xylene
  • Markers can be used to permanently identify inventory, assemblies, tools, finished products or work in progress while resisting most work related abuses or compounds
  • Valve action mechanism prevents paint in barrel from drying when the cap is left off
  • Bullet tips are replaceable to assure complete use of paint in each marker
  • Drying Time: 25-35 seconds
  • Does not contain any HAP’s (Hazardous Air Pollutants) which makes them a smart alternative to using spray paint and stencil for big, bold marks


  • Safe on most surfaces
  • Removable with DYKEM® Remover & Prep
  • Surface tests should be run to determine compatibility prior to use


  • Flammable liquid and vapor. Keep away from heat, sparks and flame. Use only with adequate ventilation. Avoid contact with skin and eyes.
  • Refer to SDS (Safety Data Sheet) for complete information on health and safety.

Packaging Details

Part No. US Color Marker Tip Units/Case Shelf Life
41001 Blue fine, felt (#49) 48 3 years
41002 Red fine, felt (#49) 48 3 years
41003 Black fine, felt (#49) 48 3 years
41004 Green fine, felt (#49) 48 3 years
41006 Yellow fine, felt (#49) 48 3 years
41008 White fine, felt (#49) 48 3 years
41009 Pink fine, felt (#49) 48 3 years
41010 Orange fine, felt (#49) 48 3 years

Search for discontinued products in the SDS Finder


Appearance / Physical State Liquid
Odor Mild. Solvent.
Boiling Point / Range 212°F (100°C)
Flash Point 62.6°F (17.0°C)
pH Value 7.5 - 8.1
Specific Gravity 0.98 - 1.13
Viscosity 15 - 20 cP
Dry Time 25-35 seconds
*Note: Drying time may vary depending on film

This website uses cookies to ensure you get the best experience on our website. More info.